1. Open router admin page. Type in your browser.

2. Open VPN Settings and click on the VPN Client.

3. From the VPN Client Type, select L2TP and click on Apply

4. Under Server Address, add any server address listed in here.

5. The username and password is the LimeVPN username and LimeVPN password. It is different from the Client area password.

6. Select MPPE Encryption as MPPE-128 and click on Apply

7. Next click on VPN Server.

8. Change VPN Server Type to L2TP Server.

9. Change the L2TP Server Status to Enabled

10. If required, enter LimeVPN username and password and click on Add.

11. Make the following changes.

  • MS-CHAPv1/2: Enable

  • Connect to DNS Server Automatically: Enable

  • Connect to WINS Server Automatically: Enable

  • MRU: 1480

  • MTU: 1480

  • Client Start IP Address:

  • Client End IP Address:

Click Apply.

Did this answer your question?