Before setup, make sure you have:
A working Internet Connection
Belkin Router that supports L2TP
An active LimeVPN subscription
In order to setup L2TP connection on your Belkin router, follow our step by step guide detailed below:
Login to your Router Administrator Console:-
Connect to the internet and launch the web browser on your computer.
You need to know your router’s local IP address to access the administrator login page.
In most cases, the local IP address is 192.168.1.1 or 192.168.0.1.
On the login page, you are prompted to enter the Router’s username and password.
Configure the L2TP Connection:-
Open the Internet WAN page, and select L2TP for the Connection Type
Enter LimeVPN username in the L2TP Account field
In the Password and Retype Password fields you need to enter your LimeVPN Password
Leave Host Name empty
In the Pre-Shared key filed enter private
Into the L2TP Server IP Address field enter the IP address of the server you want to connect to, click here for the list of servers
IP Assigned by ISP should be set to Yes
Leave the option Disconnect after unchecked
If there is Click here to enter your DNS Settings option, please click on it and enter public DNS servers: 1.1.1.1 and 8.8.8.8
Use Apply Changes option to connect to VPN
Please note that you may need to disable your router firewall if it is enabled.