How to setup L2TP VPN on Windows 10- a step by step Guide
Click on Start and then Settings.
Click on Network and Internet
Click on VPN and then Add a VPN connection
Fill the details as below:
Connection name: A name of your choice
Server address: Refer http://network.limevpn.com/ for live status of servers
VPN Type: Layer 2 Tunneling Protocol with IPsec pre shared key
Pre-shared Key: private
NOTE: If you are using a dedicated IP (LimeVPN Pro), then the Pre-shared key will be limevpnType of sign-in info: Username and password
Username (optional): LimeVPN Username
Password (optional): LimeVPN Password
Then click on Save and go to VPN and click on saved VPN connection>connect
NOTE: In case you get an error message while trying to connect, follow the below steps:
Go to Control panel and option “Network and Sharing Center”
Click on “Change adapter settings”
Right click on the new VPN connection created and select “Properties”
Under Security, click on “Allow these protocols” and check Microsoft CHAP Version 2
The connection should work fine after saving these changes